Dimaxer simulation example: hypersonic diellipsoid flow thermally strongly coupled large eddy simulation

2024-05-29

1. Description of the exampleWhen the flight speed is higher than Mach 5, there will be a significant interaction between the external aerodynamic flow field of the aircraft and the internal temper...

Dimaxer simulation example: Implicit large eddy simulation of CHN-F1 wing

2024-05-29

1、CHN-F1In this example, Dimaxer software is used to simulate the wall-resolved LES of the flying wing model under the flight condition of Mach number 0.9. The small aspect ratio flying wing aircr...

Dimaxer simulation example: high-ultra cylindrical conjugate heat transfer CHT

2024-05-29

1. Description of the exampleA hypersonic vehicle is a vehicle that flies with a Mach number greater than 5 (that is, it is capable of achieving hypersonic long-range flight in the atmosphere and a...

Aircraft landing gear standard model puller

2024-03-20

LAGOON is a benchmark for aircraft landing gear noise optimization. Landing gear noise is one of the important noise sources generated by aircraft during take-off and landing, which has an importan...

SMC001 Nozzle

2024-03-20

The SMC nozzle is a nozzle design adopted by NASA in spacecraft and rocket engines, which has two typical working conditions: cold jet and hot jet, and has both inflow and outflow properties, and u...

Aerodynamic characteristics of a fighter with a large angle of attack

2024-03-20

The aerodynamic performance of fighters with mounted missiles is a key focus in the design process, and in the case of large angles of attack, it faces a variety of problems such as flow diversion,...

M6 three-dimensional airfoil

2024-03-20

The M6 is a model of a wing designed by ONERA. The model underwent a series of wind tunnel tests under transonic conditions. Despite the simple geometry of the M6 wing, the transonic flow involved ...

30P30N three-section wing

2024-03-20

The 30P30N three-segment wing is a common aircraft wing design that is commonly used in high-speed aircraft, such as jets. The central segment usually has a greater thickness and strength and is us...

Simulation of the rotor blades of a rotating machinery for the whole cycle

2024-03-20

The Dimaxer solver is used to simulate a transonic rotor with 4th order precision, including steady-state, stall and other working conditions, and the transient flow characteristics such as complex...